服务器
首先看一下阿里云官方的教程：
文件说明：
1. 证书文件xxxxxx.pem，包含两段内容，请不要删除任何一段内容。
2. 如果是证书系统创建的CSR，还包含：证书私钥文件xxxxxxxx.key、证书公钥文件public.pem、证书链文件chain.pem。
( 1 ) 在Apache的安装目录下创建cert目录，并且将下载的全部文件拷贝到cert目录中。如果申请证书时是自己创建的CSR文件，请将对应的私钥文件放到cert目录下并且命名为xxxxxxxx.key；
( 2 ) 打开 apache 安装目录下 conf 目录中的 httpd.conf 文件，找到以下内容并去掉“#”：
#LoadModule ssl_module modules/mod_ssl.so (如果找不到请确认是否编译过 openssl 插件) #Include conf/extra/httpd-ssl.conf
( 3 ) 打开 apache 安装目录下 conf/extra/httpd-ssl.conf 文件 (也可能是conf.d/ssl.conf，与操作系统及安装方式有关)， 在配置文件中查找以下配置语句:
# 添加 SSL 协议支持协议，去掉不安全的协议 SSLProtocol all -SSLv2 -SSLv3 # 修改加密套件如下 SSLCipherSuite HIGH:!RC4:!MD5:!aNULL:!eNULL:!NULL:!DH:!EDH:!EXP: MEDIUM SSLHonorCipherOrder on # 证书公钥配置 SSLCertificateFile cert/public.pem # 证书私钥配置 SSLCertificateKeyFile cert/xxxxxxx.key # 证书链配置，如果该属性开头有 \\\'#\\\'字符，请删除掉 SSLCertificateChainFile cert/chain.pem
( 4 ) 重启 Apache。
( 5 ) 通过 https 方式访问您的站点,测试站点证书的安装配置，如遇到证书不信任问题，请查看帮助视频。
然而这只能参考。在Ubuntu下面，我是用apt安装的Apache，但是它没有httpd.conf，只有一个apache2.conf，好吧，其实这个文件和httpd.conf差不多，它里面是这样注释的：
# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
# /etc/apache2/
# |-- apache2.conf
# | `-- ports.conf
# |-- mods-enabled
# | |-- *.load
# | `-- *.conf
# |-- conf-enabled
# | `-- *.conf
# `-- sites-enabled
# `-- *.conf
#
这个版本的Apache把配置文件分散到了其他小文件中，结构就是上面那样子的。你要是愿意的话，也可以自己写一个httpd.conf然后include进去。
重点讲一下https的配置，第一步，你要保证你外部环境的443端口是打开的。
第二步确保你安装了ssl_module。没有就apt-get install openssl ，可能还需要一些依赖，但是都是小问题。
然后打开ports.conf，以下几句是不可少的：
<IfModule ssl_module> Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule>
接着打开mods-available，找到ssl.conf和ssl.load
ssl.load长这样：
# Depends: setenvif mime socache_shmcb LoadModule ssl_module /usr/lib/apache2/modules/mod_ssl.so ssl.conf长这样： <IfModule mod_ssl.c> # Pseudo Random Number Generator (PRNG): # Configure one or more sources to seed the PRNG of the SSL library. # The seed data should be of good random quality. # WARNING! On some platforms /dev/random blocks if not enough entropy # is available. This means you then cannot use the /dev/random device # because it would lead to very long connection times (as long as # it requires to make more entropy available). But usually those # platforms additionally provide a /dev/urandom device which doesn\\\'t # block. So, if available, use this one instead. Read the mod_ssl User # Manual for more details. # SSLRandomSeed startup builtin SSLRandomSeed startup file:/dev/urandom 512 SSLRandomSeed connect builtin SSLRandomSeed connect file:/dev/urandom 512 ## ## SSL Global Context ## ## All SSL configuration in this context applies both to ## the main server and all SSL-enabled virtual hosts. ## # # Some MIME-types for downloading Certificates and CRLs # AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl # Pass Phrase Dialog: # Configure the pass phrase gathering process. # The filtering dialog program (`builtin\\\' is a internal # terminal dialog) has to provide the pass phrase on stdout. SSLPassPhraseDialog exec:/usr/share/apache2/ask-for-passphrase # Inter-Process Session Cache: # Configure the SSL Session Cache: First the mechanism # to use and second the expiring timeout (in seconds). # (The mechanism dbm has known memory leaks and should not be used). #SSLSessionCache dbm:${APACHE_RUN_DIR}/ssl_scache SSLSessionCache shmcb:${APACHE_RUN_DIR}/ssl_scache(512000) SSLSessionCacheTimeout 300 # Semaphore: # Configure the path to the mutual exclusion semaphore the # SSL engine uses internally for inter-process synchronization. # (Disabled by default, the global Mutex directive consolidates by default # this) #Mutex file:${APACHE_LOCK_DIR}/ssl_mutex ssl-cache # SSL Cipher Suite: # List the ciphers that the client is permitted to negotiate. See the # ciphers(1) man page from the openssl package for list of all available # options. # Enable only secure ciphers: SSLCipherSuite HIGH:!RC4:!MD5:!aNULL:!eNULL:!NULL:!DH:!EDH:!EXP: MEDIUM # SSL server cipher order preference: # Use server priorities for cipher algorithm choice. # Clients may prefer lower grade encryption. You should enable this # option if you want to enforce stronger encryption, and can afford # the CPU cost, and did not override SSLCipherSuite in a way that puts # insecure ciphers first. # Default: Off SSLHonorCipherOrder on # The protocols to enable. # Available values: all, SSLv3, TLSv1, TLSv1.1, TLSv1.2 # SSL v2 is no longer supported SSLProtocol all -SSLv2 -SSLv3 # Allow insecure renegotiation with clients which do not yet support the # secure renegotiation protocol. Default: Off #SSLInsecureRenegotiation on # Whether to forbid non-SNI clients to access name based virtual hosts. # Default: Off #SSLStrictSNIVHostCheck On </IfModule> # vim: syntax=apache ts=4 sw=4 sts=4 sr noet
之后就是站点的配置了，这里使用默认的default-ssl.conf：
<IfModule mod_ssl.c>
<VirtualHost _default_:443>
ServerName
################加入你自己的站点配置##########
# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For example the
# following line enables the CGI configuration for this host only
# after it has been globally disabled with a2disconf.
#Include conf-available/serve-cgi-bin.conf
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# A self-signed (snakeoil) certificate can be created by installing
# the ssl-cert package. See
# /usr/share/doc/apache2/README.Debian.gz for more info.
# If both key and certificate are stored in the same file, only the
# SSLCertificateFile directive is needed.
SSLCertificateFile /etc/apache2/cert/public.pem
SSLCertificateKeyFile /etc/apache2/cert/xxxxxxx.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
SSLCertificateChainFile /etc/apache2/cert/chain.pem
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/ssl/certs/
#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/apache2/ssl.crl/
#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line\\\' version of the client\\\'s X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this `xxj31ZMTZzkVA\\\'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*\\\' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions FakeBasicAuth ExportCertData StrictRequire
<FilesMatch \\\\.(cgi|shtml|phtml|php)$>
SSLOptions StdEnvVars
</FilesMatch>
<Directory /usr/lib/cgi-bin>
SSLOptions StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn\\\'t wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable nokeepalive for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables downgrade-1.0 and
# force-response-1.0 for this.
# BrowserMatch MSIE [2-6] \\\\
# nokeepalive ssl-unclean-shutdown \\\\
# downgrade-1.0 force-response-1.0
</VirtualHost>
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
发现了吗，这是把阿里云教程里的配置项分散到了两个配置文件里面。
然后在浏览器上使用https访问，成功。(linux可以使用wget或curl测试)
以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持三五互联。
更多关于云服务器，域名注册，虚拟主机的问题，请访问三五互联官网：www.35.com
